Himiway C5 - Riding Modes

22
Adjustment of the front fork
By adding compression, riders can firm up the suspension to stay higher in its travel
and offer a more supported ride. Less compression offers a plusher or softer
suspension feel.
Riding Modes
Higher pedal settings (L4/5) would be most helpful for those who want to ride faster
with minimum effort. These settings are perfect for people who want to arrive fresh
and timely at work, without being sweaty and exhausted.
Lower pedal settings (L1/2) are popular for Himiway riders to use after work, or when
leisurely exercise is preferred. These are best to use on the way home from work, to
refresh yourself and relieve stress accumulated throughout the entire workday.
Moreover, lower settings can extend usable range for longer rides, maximizing
enjoyment while minimizing physical stress and fatigue.
Pedal-Assist is an operating mode on e-bikes designed to engage the motor to assist,
but not replace, your own pedaling effort. When you are operating your bike in the pedal
assist mode, you can adjust the setting according to your preference. Himiway has five
pedal assist settings - ranging from 1 to 5.
•
•
◆ Pedal-assist
The throttle mode is similar to how a motorcycle or scooter operates, alleviating the
need to pedal or providing an additional boost simply by twisting the throttle.
Himiway Ebike can reach speeds of up to 25 miles/h with throttle mode, which not only
allows you to travel faster, but also reassures riders with extra power whenever needed,
depending on traffic conditions and rider energy levels. If you are an adventurer who
chases after speed and distance without compromising comfort or safety, the
throttle-assisted Himiway would be your perfect companion.
◆ Throttle-only
Please find more adjustment information on Owners’ Resources.
◆ Compression Adjustment Knob (Figure 2)
•
•
Rotate clockwise (+ direction) to increase damping. This will result in a slower
compression rate.
Rotate counterclockwise (- direction) to decrease damping. This will result in a faster
compression rate.
◆ Rebound Adjustment Knob (Figure 1)
Figure 1
•
•
Rotate clockwise (+ direction) to increase damping. This will result in a slower
rebound rate.
Rotate counterclockwise (- direction) to decrease damping. This will result in a faster
rebound rate.
Figure 2