xii
―――――――――――――――――――――――――――
Note on Use
――――――――――――――――――――――――
NOTE
The indicator appears when battery voltage
becomes low. During which time accuracy cannot
be guaranteed. Replace batteries only with the
specified type.
When replacing the battery, make sure that the
metal battery snap fitting is firmly connected. If the
metal fitting is loose, adjust it and recheck the
connection.
To avoid corrosion from battery leakage, remove the
batteries from the instrument if it is to be stored for
a long time.
Correct measurement may be impossible in the
presence of strong magnetic fields, such as near
transformers and high-current conductors, or in the
presence of strong electromagnetic fields such as
near radio transmitters.
To Next Page
Loading...