Hioki 3286-20 - Measurement Condition Save Function

36
―――――――――――――――――――――――――――
Chapter 2 Measurement Procedure
――――――――――――――――――――――――
2.10 Measurement Condition Save
Function
(2) Setup of measurement line frequency
Item No. 1-02
AUTO Automatically detects measurement line
frequency.
50 Hz Sets measurement line frequency to 50 Hz.
60 Hz Sets measurement line frequency to 60 Hz.
(3) Setup of display update rate
Item No. 1-03
(SAMP)
NORM Sets display update to normal rate (1 s).
(NORMAL)
SLOW Sets display update to SLOW (3 s).
(SLOW)
(4) Setup of auto power-off function
Item No. 1-04
ON Enables the auto power-off function.
OFF Disables the auto power-off function.
(5) Setup of buzzer function
Item No. 1-05
ON Enables the buzzer function.
OFF Disables the buzzer function.
1. Hold down the
HOLD
key at instrument power-off.
The measurement conditions in effect at that point
are saved.
2. The measurement conditions thus saved are the
measurement line, power, harmonic display, current,
and voltage ranges.