EasyManua.ls Logo

Hioki 3286-20 - Page 64

Hioki 3286-20
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
―――――――――――――――――――――――――――
Chapter 3 Specifications
―――――――――――――――――――――――
Zero suppression
5 counts (for current and voltage
measurement)
Location for use
Indoor, altitude up to 2000 m (6562 feet)
Applicable standards
Safety:
EN 61010
Measurement categories III (expected
transient overvoltage: 6000 V), Pollution
level 2,
EN 60529 IP40 (protected against access
to hazardous parts with a wire)
EMC:
EN 61326
Maximum conductor
diameter for
measurement
φ 55 mm max.
80 x 20 mm bus bar
Operating temperature
and humidity range
0to40 (32 to 104 ),
80%RH or less (no condensation)
Temperature
characteristics
Current and voltage
measurement
In0to40 range: 0.1 x accuracy
specifications/
Phase detection
circuit
In0to40 range: Within 2deg.
Storage temperature
range
-10to50
(14 to 122 , no condensation)
Power source
6LR61, 6LF22 alkaline battery
9V x 1
Maximum power
consumption
220 mVA
Battery life
Alkaline battery (6LR61, 6LF22)
approx. 25 hours
Manganese battery (6F22) approx. 10 hours
External dimensions
Approx. 100W x 287H x 39D mm
Approx. 3.94"W x 11.30"H x 1.54"D
Mass
Approx. 650 g (except for the battery)
Approx. 22.9 oz. (except for the battery)