Hope Electronics Technology Manual Edition V1.0 65
7.3 save at regular intervals (interval memory function)
This function can save measured data at specified intervals. Using this
function together with
△
T makes it easy to perform a temperature rise test (for
estimation of power-off temperature).
Press the [MODE] key to switch the saving mode
oFF→Auto-hold (A.HOLD) →Auto-memory (A.HOLD, A.MEMORY)
→Interval (INTERVAL) → oFF
Press the [▲][▼][◀][▶] key to set the interval time.
Press the [ENTER] key to confirm the setting; press the [ESC] key to cancel
the setting.
The time that data can be saved varies depending on the number of memory
units already saved and the set interval time.
To Next Page
Loading...
