EasyManua.ls Logo

Hioki CM4371 - Electrical Characteristics

Hioki CM4371
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40
Specications
Dustproof and waterproof Jaw, barrier: IP50
Grip: IP54 (when measuring an insulated conductor only)
Risk of electric shock from the conductor being measured increases when wet.
Electrical Characteristics
Display update rate
(measured value)
Measured value excluding electrostatic capacity, frequency, and temperature:
5 times/s (after the range is xed)
Electrostatic capacity: 0.5 to 5 times/s (The number of times varies depending
on the capacitance.)
Frequency: 0.3 to 5 times/s (The number of times varies depending on the
capacitance.)
Temperature: 1 times/s (including thermocouple wiring break check)
(Dened within the measurement range (excluding range changes)).
Maximum terminal-to-
terminal rated voltage
1000 V AC (up to 1 kHz) /1700 V DC
Maximum rated voltage
to earth
1000 V AC (Measurement category III)
600 V AC (Measurement category IV)
Anticipated transient overvoltage: 8000 V
Rated supply voltage 1.5 V DC ×2
LR03 Alkaline battery ×2

Related product manuals