Hioki DT4200 Series - Page 12

12
Circuit breaker
false trip
prevention built-in
AC clamp-on measurement Frequency
Resistance Continuity check
Temperature Diode test
Capacitance Conductance
AC/DC automatic detection Voltage detection function
DC voltage 600.0 mV to 600.0 V
AC voltage 6.000 V to 600.0 V
DC + AC voltage DT4281/4282 only
DC current n/a
AC current n/a
AC clamp-on measurement Frequency
Resistance Continuity check
Temperature Diode test
Capacitance Conductance
AC/DC automatic detection Voltage detection function
DC voltage 600.0 mV to 600.0 V
AC voltage 6.000 V to 600.0 V
DC + AC voltage DT4281/4282 only
DC current n/a
AC current n/a
AC clamp-on measurement Frequency
Resistance Continuity check
Temperature Diode test
Capacitance Conductance
AC/DC automatic detection Voltage detection function
DC voltage 600.0 mV to 600.0 V
AC voltage 6.000 V to 600.0 V
DC + AC voltage DT4281/4282 only
DC current n/a
AC current n/a
AC clamp-on measurement Frequency
Resistance Continuity check
Temperature Diode test
Capacitance Conductance
AC/DC automatic detection Voltage detection function
DC voltage 600.0 mV to 600.0 V
AC voltage 6.000 V to 600.0 V
DC + AC voltage DT4281/4282 only
DC current n/a
AC current n/a
*According to Hioki research conducted in April 2015.
Featuring the world’s fastest DMM engine*
The DT4200 series features a dedicated IC that Hioki developed
in-house in order to deliver unprecedented measurement speed.
Pocket models
Featuring a compact body for ergonomic hold
and a reliable, safe design
DC V typical accuracy: ±0.5% rdg. ±5 dgt.
Measurement categories: CAT III (600 V), CAT IV (300 V)
For electrical
work in the eld
DT4221
Delivering maximum eld safety
for workers whose principal use
is voltage measurement.
For electrical
work in the eld
DT4223
Delivering maximum eld safety
for workers whose principal use
is voltage measurement.
For multiple
applications
DT4222
For laboratories and R&D
applications to measure a wide
variety of parameters.
For multiple
applications
DT4224
For laboratories and R&D
applications to measure a wide
variety of parameters.
Supported measurement parameter Supported measurement parameter (with model-specic variations) Unsupported measurement parameter
*The range gures given indicate the instrument’s measurement ranges (not the range of measurable values).