30
Re-energize the Vehicle’s High-voltage Bus (Restore the High Voltage)
Re-energize the Vehicle’s High-voltage
Bus (Restore the High Voltage)
1
Verify that there is no voltage between the inverter and
traction battery sides of the bus. (p. 22)
2
Connect the high-voltage bus cables to the inverter and
traction battery sides of the bus.
3
Reconnect the service plug.
4
Re-energize the vehicle’s high-voltage bus.
For more information about how to re-energize the vehicle’s high-
voltage bus, see the vehicle manufacturer’s service manual.
Specications
For more information about an instrument’s specications, refer to its
Instruction Manual.
To Next Page
Loading...
