Installation EAGLE One
Release
03
07/2014
17
1 Description
1.1 General description
The EAGLE One devices support the authentication, security and
confidentiality of communication within production networks, but also beyond
company boundaries.
The EAGLE One devices support the following network modes:
Transparent mode
Router mode
PPPoE mode
The EAGLE One devices are used everywhere that security-sensitive
network cells require a connection from the internal network to the external
network. The EAGLE One devices are the link between the internal network
and the external network from which unauthorized access is possible. In its
function as a link, the EAGLE One devices help you to protect the security-
sensitive cell from undesired data traffic along the connection to the external
network.
Typical uses are:
Helping protect individual production cells in a flat company network
Helping protect individual production cells in a routed company network
Coupling identical production cells to a company network
Connecting a production cell with the office network via a public network
Helping provide protected service access
Separation of machine common parts
You can choose from between a wide range of variants. You have the option
to set up your device individually based on different criteria:
Types of connectors
Temperature range
Certifications
The EAGLE One devices are designed for the special requirements of
industrial automation. They meet the relevant industry standards, provide
very high operational reliability, even under extreme conditions, and also
long-term reliability and flexibility.
The devices allow you to set up switched and routed industrial Ethernet
networks that conform to the IEEE 802.3 standard.
To Next Page
Loading...