Installation EAGLE One
Release
03
07/2014
29
2Installation
Before installing and starting up the device, read the safety instructions.
See “Safety instructions” on page 5.
2.1 Overview
The devices have been developed for practical application in a harsh
industrial environment.
On delivery, the device is ready for operation.
The following steps should be performed to install and configure a device:
Check the contents of the package
Installing and grounding the device
Connecting the power supply and signal lines
Wiring the digital input (optional)
Operating the device
Connecting data cables
2.2 Check the contents of the package
Check whether the package includes all items named in the section
“Scope of delivery” on page 48.
Check the individual parts for transport damage.
2.3 Installing and grounding the device
WARNING
FIRE HAZARD
Install the device in a fire protected enclosure according to EN 60950-1.
Failure to follow these instructions can result in death, serious injury,
or equipment damage.
To Next Page
Loading...