Installation EAGLE One
Release
03
07/2014
31
2.3.3 Grounding the device
The device has a functional ground connection.
The device is grounded via the separate ground screw.
Ground the device via the ground screw.
2.4 Connecting the terminal blocks
WARNING
ELECTRIC SHOCK
Ground the device before connecting any other cables.
Failure to follow these instructions can result in death, serious injury,
or equipment damage.
WARNING
ELECTRIC SHOCK
Never insert pointed objects (narrow screwdrivers, wires, etc.) into the
device or into the connection terminals for electric conductors. Do not touch
the connection terminals.
Start connecting the electrical wires only if all the above safety
requirements are fulfilled.
See “Working voltage” on page 6.
See “Input/output interfaces” on page 7.
Failure to follow these instructions can result in death, serious injury,
or equipment damage.
To Next Page
Loading...