38
Installation EAGLE One
Release
03
07/2014
Result: The browser sets up an HTTPS connection to the EAGLE One. The
browser displays a security message.
Confirm the security message with “Yes”.
To login to the device, enter the following:
– Login: admin
– Password: private
(case-sensitive)
Result: The browser displays the administrator website of the EAGLE One.
Specify the settings of the device in accordance with the “User Manual
Configuration”.
Alternatively, you have the option of performing the IP configuration for the
Transparent mode using the HiDiscovery protocol. You will find the
HiDiscovery software in the CD/DVD included in the delivery.
Note: If the browser fails to set up the configuration connection to the EAGLE
One, you find detailed information in the “User Manual Configuration –
Industrial Ethernet Firewall EAGLE One”.
Figure 2: Configuration before the installation of the EAGLE One
Figure 3: Configuration after the installation of the EAGLE One
To Next Page
Loading...