Hisense 40H5F - Establish a Network Connection

10
STEP 3. Establish a Network Connection
1.
Press the
[
]
button on the remote control, press
[
˅
]
button to select
Settings
and then press
[
OK
]
to enter the Settings menu.
2.
Select
Network
→
Network Conguration.
TV JACK
Modem Cabl
eL
AN CableLAN Cable
External Modem
(ADSL / VDSL / Cable TV)
IP Sharer (Router)
(with DHCP server)
LAN
Establish a wired network connection
Automatically obtain an IP address
1. Select
Wired LAN
. The TV will automatically obtain an IP address and connect to the network.
NOTE: The default option of IP Settings Mode is DHCP.
2. If the connection fails then "
Disconnected
" will display for the Ethernet status. Retry or enter the
IP Settings
, select
Manual
to input the
information again.
Manually enter the IP address
1. Select
Manual.
2. Enter the IP Address, Netmask, Gateway, DNS Server 1 and DNS Server 2 in the menu. Next, select
Save
.