Hisense APH12 User Manual

23
Fan Only-Only the fan runs. Press FAN button to adjust
fan speed.
NOTE: Auto fan speed cannot be selected in Fan Only mode.
SMART Mode
Press the SMART button, Smart mode (fuzzy logic operation) is
directly regardless of the unit is on or off. In this mode,
temperature and fan speed are automatically set based on the
actual room temperature.
■
■ Heating-Heats the room. Press FAN to select the fan speed.
Press the up or down TEMP button to adjust the temperature.
Dry-Dries the room. The air conditioner automatically
selects the temperature. The fan runs on Low speed only.
NOTE: Dry mode should not be used to cool the room.
■
SMART
22°C
26°C
26°C
23-26°C
21-23°C
21°C
Room temperature
decrease 2 after
operate for 3 minutes
°C
26°C
23-26°C
23°C or below
Room temperature
decrease 2 after
operate for 3 minutes
°C
Operation mode and temperature are determined by indoor temperature.
Temperature, airflow and direction are controlled
automatically in smart mode. However, a decrease or rise of
up to can be set with the remote controller if you still feel
uncomfortable.
2°C
NOTE:
With Heater models
Cooling only models
SUPER
SUPER button is used to start or stop fast cooling or heating.
1. Press SUPER
button. The air conditioner automatically
sets the fan speed to High and the temperature to 16°C.
2. To turn off Super control, press any button on the remote
control or control panel except Timer On, Timer Off, Clock,
Dimmer,Ifeel and Swing.
NOTE:
In the SUPER mode you can set airflow direction or timer.
■
SMART mode are not available in SUPER mode.
■
SUPER button is ineffective in SMART mode.
■
SUPER
fast heating
ON
OFF
fast cooling
ON
OFF
Fast heating operates at auto fan speed,changing the set
temperature automatically to 30°C.
FAN
SWING
Indoor fan speed alternates among
High, Medium and Low each time
this button is pressed.
Button
Button
Adjustment
■ High for maximum fan speed
Fan Speed
1. Press FAN button, Choose desired fan speed.
■ Auto-Automatically controls fan speed depending on
current room temperature and temperature control
setting.
Auto fan speed cannot be selected in Fan Only
mode.
■ Mid for normal fan speed
■ Low for minimum fan speed
NOTE:
26°C
A decrease or rise of up to can be set with the
remote controller if you still feel uncomfortable.
2°C
To cancel Smart Mode, just press the MODE button.

Hisense APH12 Specifications

General

Type	Split system
Multi-split	No
Timer type	Digital
Noise level	64 dB
Number of speeds	3
Remotely operated	Yes
Airflow (high speed)	380 m³/h
Refrigerating medium	R290
Cooling capacity (max)	- BTU/h
Dehumidifying capacity	1.3 l/h
Timer duration (maximum)	24 h
Air conditioner functions	Cooling, Dehumidifying, Fan, Heating
Refrigerating medium weight	300 g
Suitable for room area up to	36 m²
Cooling capacity in watts (max)	- W
Cooling capacity in watts (nominal)	3500 W
Heating capacity in watts (nominal)	3000 W
Cooling energy efficiency (EER, W/W)	2.6
Heating energy efficiency (COP, W/W)	2.8
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency class (cooling)	A
Energy efficiency class (heating)	A+
Hourly energy consumption (cooling)	- kWh
Display type	LED
Product color	White

Weight and Dimensions

Depth	382 mm
Width	442 mm
Height	750 mm
Weight	35000 g
Package weight	39500 g