Hisense H4 series User Manual

•
If Pure High-throughput (Greenfield) 802.11N mode is selected and the Encryption type is set to
WEP, TKIP or TKIP-AES (WPS2 Mixed) for your Access Point (AP), then the TV will not support a
connection in compliance with these wireless certification specifications.
•
If your access point (AP) supports Wi-Fi Protected Setup (WPS), you can connect to the network
via Push Button Configuration (PBC) or PIN (Personal Identification Number). WPS will
automatically configure the SSID.
8

Hisense H4 series Specifications

General

Display Type	LED
HDMI Ports	3
USB Ports	2
Wi-Fi	Yes
HDR Support	HDR10, HLG
Refresh Rate	60Hz
Bluetooth	No
Smart TV	Yes
Screen Sizes	43", 50", 55"