Auto power off settings
To help you save energy, your Hisense • Roku TV can automatically turn itself off after a period of
inactivity or a period during which no signal has been detected. It is factory-configured to do both of
these things, but you can change these settings if needed.
To configure automatic power off, from the Home screen menu navigate to Settings > System > Power >
Auto power off. In the Power settings screen, highlight the following options and press OK to turn them
on or off:
• After 15 mins of no signal – If no signal is detected on a TV input for 15 minutes, the TV
automatically powers off.
• After 4 hours of no interaction – If no remote control or panel button is pressed for 4 hours and
the TV is not displaying a TV signal or streaming a video, the TV is automatically powered off.
Configure parental controls
Parental controls enable you to control whether the members of your household can view certain kinds
of broadcast TV programs. When a program or feature is blocked, you can unblock it by entering a
parental control PIN that only you know.
Note: The parental control feature does not block streaming videos or content from inputs
other than Antenna TV.
Creating a parental control PIN
The first time you access the Parental controls screen, you must create a new parental control PIN.
Thereafter, whenever you want to change parental control settings, unblock programming that has been
blocked, change the PIN, or disable parental controls, you must enter your parental control PIN.
48
To Next Page
Loading...
Need help?
General
