Hisense I6421C User Manual

29
1
2
1
1. Silicone sealant, 2. Sealing tape
Pay particular attention to built-in dimensions with (natural)
stone countertops. When choosing the silicone sealant,
observe the countertop material and consult the countertop
manufacturer. Use of inappropriate silicone sealants can result in
permanent discolouration of some parts.
2. Removing the built-in appliance:
Disconnect the appliance from the power mains.
Use a suitable tool to remove the silicone gasket from the perimeter. Remove the
appliance by pushing it upwards from the bottom side.
Do not attempt to remove the appliance from the upper side of
the counter!
Stone countertop
1
3
2
4
16
5,5
56
54
ʈ
1 - Countertop
2 - Appliance
3 - Slot
Given the margin of error (tolerance) for the glass ceramic plate of the appliance, and the
cutout in the countertop, the slot is adjustable (min. 2 mm).
785072

Hisense I6421C Specifications

General

Hob type	Zone induction hob
Hob cover	No
Frame type	Frameless
Product color	Black
Hob width size	60 cm
Top surface type	-
Appliance placement	Built-in
Number of gas cooking zones	0 zone(s)
Number of electric cooking zones	4 zone(s)
Control type	Touch
Easy to clean	Yes
Control position	Front
Number of boosters	4
Connected load (gas)	- W
Connected load (electric)	7200 W
Package depth	640 mm
Package width	715 mm
Package height	110 mm
Package weight	8100 g

Weight and Dimensions

Depth	520 mm
Width	595 mm
Height	58 mm
Weight	7600 g