1 Press [Menu] button to display the main
menu.
2 Press [∧/∨] button to select Function item.
3 Press [＞/OK] button to enter Function
menu.
4 Press [∧/∨] button to select the option,
press [＞/OK] button to enter or press [＜/＞]
button to adjust the option.
5 Press the [Menu] button to close the menu.
The options are:
■ OSD Language: Sets the menu language.
■ Blue Screen: Turns on or off display of a blue screen as the image when there is no
video signal.
■ OSD Setting: It including OSD Timer and Transparency, sets the time and
transparency of menu separately.
■ Sleep Timer: Sets the sleep time.
■ Factory Reset: Resets your TV to the factory defaults. You can use this function when
this unit is in an abnormal state or you want to make it return to the factory reset.
■ CC: sets the CC mode. It including CC,CC1, CC2,CC3,CC4,T1,T2,T3,T4,XDS , the
CC closed temporarily when the OSD menu appears.
■ Parental Control: Set the rating of program, When you first use this function, it
including the default Password is [0000], Once you input this password, you can
continue to the next operation.
1. Change Password
At the first time, you can use the default password. If you need to change the
password, use this function. First enter the new password then enter the same password
again. You will get the new password.
2. V-CHIP
Press the Right button to change state between on/off. When setting the V-CHIP in
an on state, the RATING function can enable.
3.TV RATING
Press the up/down button to select the RATING and press the right button to choose
the TV RATING according to the illustrations on the screen.
The setting for Movie Rating, English Rating, and French Rating follow the steps
mentioned above.
■ Software Update: For software update only. It should be set to “On” when software
update needed. It is strongly recommended that this item be set to “Off” during
day-to-day applications, otherwise the startup speed will slow down.
To Next Page
Loading...