Passenger outside air screen. Passenger inside air screen.
1.11. Setting the passenger climatization unit to automatic.
If the position of the passenger unit recirculation flaps or the speed of the evaporator fans are adjusted
manually, or if the pre-heater, defroster or ECO mode are selected manually, the passenger climatization will
switch to manual and the LED located next to key (15) will go off.
By pressing passenger key (15) all the settings return to automatic and, if the driver node is also set to
automatic, the automatic screen is displayed indicating the outside temperature and the one selected for the
driver’s area and that of the passengers.
Automatic operation screen.
1.12. ECO Option
The ECO option allows the driver to switch off the compressor of the air-conditioning unit in atmospheric
conditions in which its use is not regarded as necessary. While the ECO option is on it is not possible to switch
on the compressor.
To switch on the ECO option, press the (12) key.
This option is switched off by re-pressing the (12) key or pressing the driver or passenger unit
keys (3),(15).
If you press the defrost key (9) while the ECO option is on, it will be switched off. When you se-
lect the ECO option, the following Manual screen will be displayed.
ECO Manual screen
To Next Page
Loading...