1.13. Programming the clock.
At any time, if you press down key (12) for 2 seconds, the screen changes to the
clock programming function.
Here the screen will appear as shown below, allowing the setting of the day of the week, hour and minutes.
Day/time programming screen.
With the driver unit (1) and (2) keys, we can select the day, the hour or the minutes which will appear
on the screen against a dark background, while the passenger keys (16) and (17) allow us to adjust the
settings of the chosen field.
Confirmation of the time programmed is given by pressing key (12). Once the time has been validated in
this way the screen will return to the previous display.
1.14. Pre-heater.
The pre-heater offers two operating modes: programmed or normal mode.
1.14.1. Programmed mode.
The pre-heater can be programmed to come on twice in days and time. Each of the programmes sets the
day and time when we want the bus to be warm (the controls calculate what time the pre-heater needs to
come on in order to do so).
To enter programming, press the (8) key for 2 seconds, and you will enter the screen for the first pro-
gram. If you press for another 2 seconds, you will enter the screen for the second program. Each of these
screens ahs a flame symbol with a number which indicates if it is program 1 or 2.
Pre-heater program screen
Use the driver unit (1) and (2) keys to move between the fields of day, hour, minutes and Activation.
The selected field will be highlighted in bold as shown in the drawing.
With passengers’ keys (16) and (17) you can adjust the settings of the selected field.
You can program any day from Monday to Sunday or 7 days (for all the days of the week).
To Next Page
