If it is set to Soft demist, the system will fix speed 3 and this speed can’t be manually changed. In
the same way, if Hard demist is selected, the system will fix speed 5 and this speed can’t be man-
ually changed.
If it is set to LSD (Long Soft Demist), speed can be manually changhe between speed 3 and speed
5.
When the speed of the fans of the driver climate unit is adjusted manually, the Manual screen will be dis-
played.
Manual screen (driver’s fan).
1.4. Adjusting the driver unit air recirculation flaps.
If the driver node is set to climatization, the positions of the recirculation flaps can be adjusted using the
driver unit key (6). You can select either air from outside (renewal) or inside (recycling).
When the recirculation flaps are adjusted manually, the following display will appear on the screen:
Manual screen outside air Manual screen inside air.
Under certain conditions the system will not allow manual change of the flaps position, as it is the case
when Demist function is working.
To Next Page
Loading...