Hisun FORGE 110 - Brake System Inspection and Test

5-3 Pre Operation Check List
Brake System
.
Before riding the ATV, always inspect the
brake system
Inspect the fluid level in the master cylinder, if
low, add dot 4 brake fluid.
Inspect brake fluid hoses, fittings and master
cylinder for leaks. If a leak is found, contact
your Hisun Authorized service center for
repair.
Braking test
Test brakes for proper operation at slow
speeds. If brakes are not working properly,
contact your Hisun Authorized service center
for repair.
WARNING
POTENTIAL DANGERS
Brakes not working properly
WHAT COULD HAPPEN
Can cause an accident which could result
in severe injury or death.
HOW TO AVOID
Inspect brakes each time before operating
the ATV.