Control Functions 4-4
NOTE:
If the indicator light flashes under any other
circumstances or the speedometer does not
show the speed while riding, have a service
center check the speed sensor circuit.
Parking brake indicator light “P”
This indicator light comes on when the
parking brake is applied.
On-Command four-wheel-drive/differential
gear lock indicator
The On- Command four- wheel-drive
indicator comes on when the On-Command
four- wheel-drive switch is set to the “4WD”
position.
The On-Command differential gear lock
indicator in the On-Command four-wheel-
drive indicator also comes on when the
On-Command differential gear lock switch is
set to the “LOCK” position.
NOTE:
Due to the synchronizing mechanism in the
differential gear case, the four-wheel- drive
indicator may not come on until the vehicle
starts moving.
● When the on-command differential gear
lock switch is set to “LOCK”, the indicator
will flash until the differential gear is
locked.
Coolant temperature warning light “
”
When the coolant temperature reaches a
specified level, this light comes on to warn
that the coolant temperature is too hot. If the
light comes on during operation, stop the
engine as soon as it is safe to do so and
allow the engine to cool down for about 15
To Next Page
Loading...
