Control Functions 4-6
z If fault indicator light of EPS system is lit,
that means EPS system find out some
fault during ECU self-checking process,
then you should consult your local
dealer for maintenance in time.
Multi-Function Display Gauge
1. Speedometer
2. Clock/Hour/ fault code meter
3. Tachometer
4. Metric/mile button
5. “TRIP/ODO” button
6. Right turn indicator
7. Left turn indicator
8. Clock/Hour/ fault code reset button
The multi-function meter unit is equipped
with the following:
z Speedometer (which shows the riding
speed)
z Odometer (which shows the total distance
traveled)
z Two trip meters (which show the distance
traveled since they were last set to zero)
z Clock
z Hour meter (which shows the total time
the key has been turned to “ON”)
z Fault code meter （To display the faults of
Electronic Fuel Injection system）
To Next Page
Loading...
