What to do if the ignition system fails on my Hisun HS700UTV-4?
- CCory KelleyJul 31, 2025
If the ignition system of your Hisun Utility Vehicle fails, start by replacing the fuse(s). Then, clean the battery terminals and recharge or replace the battery if necessary. Check the spark plug's condition, type, and gap, and repair or replace the spark plug as needed. Replace the spark plug cap, ignition coil, main switch, and pickup coil/stator assembly if problems persist. Ensure the ignition system is properly connected, and as a last resort, replace the ECU.