MAINTENANCE AND ADJUSTMENT OF THE UTV
- 99-
pressing down on it and then remove it.
6. Drain:
·coolant
7. Disconnect:
·coolant outlet hose ①
·water pump inlet hose ②
8. Drain:
·coolant
9. Check:
·copper washer ①
·coolant drain bolt ②
Damage
Replace.
10. Install:
·coolant drain bolt (water pump) T R.
10 Nm (1.0 m · kg, 7.2 ft · lb)
11. Connect:
·water pump inlet hose
·coolant outlet hose
12. Remove:
·air bleed bolt ①
13. Fill cooling
(with the specified amount of the
recommended coolant)
Recommended antifreeze
High-quality ethylene glycol antifreeze
containing corrosion inhibitors for
aluminum engines
Mixing ratio
1 : 1 (antifreeze : water)
Quantity total amount
2.5 L (2.20 Imp qt, 2.64 US qt)
Coolant reservoir capacity
0.35 L (0.31 Imp qt, 0.37 US qt)
To Next Page
Loading...
