ELECTRICAL COMPONENTS
- 335 -
1WARNING：
Handle the thermo switch 3 with special
care.
Never subject it to a strong shock or allow it
to be dropped. Should it be dropped, it must
be replaced.
Thermo switch 3
28 Nm (2.8 m · kg, 20 ft · lb)
GOOD CONDITION
6. Wiring connection
• Check the connections of the entire starting
system. Refer to “CIRCUIT DIAGRAM”
CORRECT
This circuit is not faulty.
2WD/4WD SELECTING SYSTEM
Circuit diagram
（See375 page）
BAD CONDITION
Replace the thermo switch 3
POOR CONNECTION
Properly connect the cooling system.
To Next Page
Loading...
