Hisun HS700UTV-4 - Checking the Brake Hoses and Brake Pipes

MAINTENANCE AND ADJUSTMENT OF THE UTV
- 107-
Replace the brake pads as a set.
Refer to “FRONT AND REAR BRAKES” in
chapter 5.
Brake pad wear limit ○a
1.5 mm (0.06 in)
3. Operate the brake pedal.
CHECKING THE BRAKE HOSES AND BRAKE
PIPES
1. Remove:
·driver seat
·passenger seat
·console
Refer to “SEATS” in chapter 5.
2. Lift the hood up.
3. Lift the cargo bed.
4. Check:
·front brake hoses ①
·rear brake pipes ②
·rear brake hoses ③
Cracks/wear/damage
Replace.
Fluid leakage Replace all damaged parts.
Refer to “FRONT AND REAR BRAKES” in
chapter 5.
NOTE:
Hold the vehicle in an upright position and
apply the brake pedal.
5. Install:
·console
·passenger seat
·driver seat