EasyManua.ls Logo

Hisun HS700UTV-4 - Checking the Wheels; Checking and Lubricating the Cables

Hisun HS700UTV-4
388 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE AND ADJUSTMENT OF THE UTV
- 120-
• Set tire pressures when the tires are cold.
• Tire pressures must be equal in both front
tires and equal in both rear tires.
2. Check:
tire surfaces
Wear/damage
a
Replace.
Tire wear limit
a
Front and rear: 3.0 mm (0.12 in)
WARNING
:
It is dangerous to ride with a worn-out tire.
When tire wear is out of specification, replac
e
the tire immediately.
CHECKING THE WHEELS
1. Check:
Wheels
Damage/bends
Replace.
NOTE:
Always balance the wheel when a tire or
wheel has been changed or replaced.
WARNING
:
• Never attempt even small repairs to th
e
wheel.
• Ride conservatively after installing a tire to
allow it to seat itself properly on the rim.
CHECKING AND LUBRICATING THE
CABLES
WARNING
:
A damaged cable sheath may cause
corrosion and interfere with the cable
movement. An unsafe condition may result
so replace a damaged cable as soon as
possible.
1. Check:
cable sheath Damage
Replace.
cable operation Unsmooth operation

Table of Contents

Related product manuals