Hisun HS700UTV-4 - Changing the Tail;Brake Light Bulb

MAINTENANCE AND ADJUSTMENT OF THE UTV
- 130-
• Close the hood.
CHANGING THE TAIL/BRAKE LIGHT BULB
1. Remove:
• cargo bed panel ①
• tail/brake light bulb holder (with bulb) ②
• bulb
NOTE:
Turn the bulb holder counterclockwise and
remove the defective bulb.
WARNING :
Keep flammable products and your hands
away from the bulb while it is on, since it will
be hot. Do not touch the bulb until it cool
s
down.
2. Install:
• bulb new
Secure the new bulb with the tail/brake light
bulb holder.
NOTE:
Avoid touching the glass part of the bulb.
Keep it free from oil; otherwise, the
transparency of the glass, life of the bulb, and
luminous flux will be adversely affected. If oil
gets on the bulb, thoroughly clean it with a
cloth moistened with alcohol or lacquer
thinner.
• tail/brake light bulb holder (with bulb)
• cargo bed panel