MAINTENANCE AND ADJUSTMENT OF THE UTV
- 87-
② Fan impeller
③ As manhole covers
3. calibration
· Wrench to counterclockwise rotation
crankshaft
· According to the rotor turning
counterclockwise, rotor turn to mark the dead
spots ② of crank box, namely ①: the dead
point position is compressed.
4. Check:
·valve clearance
·Beyond the standard
Adjust.
Valve clearance (cold)
Intake
0.08 ~ 0.12 mm
(0.0031 ~ 0.0047 in)
Exhaust
0.12 ~ 0.15 mm
(0.0047 ~ 0.0059 in)
To Next Page
Loading...
