15.3.2 Description
The PI6CX100-27 is a low-cost, high-performance 3.3V VCXO, designed to replace expensive VCXO
modules. The on-chip Voltage Controlled Crystal Oscillator accepts a 0 to 3.3V input voltage to cause
clocks to vary by ±120ppm. This device uses an inexpensive external pullable crystal at 27 MHz to
produce the same output frequency.The PI6CX100-27 is designed for Set-Top Box applications.
15.4. 74V1G08
SINGLE 2-INPUT AND GATE
HIGHSPEED: tPD = 4.3 ns (TYP.) atVCC= 5V
LOWPOWERDISSIPATION:
I
CC =1 PA (MAX.) at TA =25 oC
HIGHNOISEIMMUNITY:
V
NIH=VNIL =28%VCC (MIN.)
POWERDOWN PROTECTIONON INPUTS
SYMMETRICAL OUTPUT IMPEDANCE:
|I
OH| = IOL = 8 mA(MIN)
BALANCEDPROPAGATIONDELAYS:
tPLH #tPHL
OPERATINGVOLTAGERANGE:
V
CC (OPR)= 2V to 5.5V
IMPROVEDLATCH-UP IMMUNITY
16.4.1 Description
The 74V1G08 is an advanced high-speed CMOS SINGLE 2-INPUT AND GATE fabricated with sub-
micron silicon gate and double-layer metal wiring C
2MOS technology.
15.5. FMS6145
Low Cost Five Channel 4th Order Standard Definition Video Filter Driver
15.5.1 Features
x Five fourth-order 8MHz (SD) filters
x Transparent input clamping
x Dual video load drive (2Vpp, 75)
x AC or DC-coupled inputs
x AC or DC-coupled outputs
x DC-coupled outputs eliminate AC-coupling capacitors
x 5V only
x Lead (Pb) Free TSSOP-14 package
To Next Page
Loading...
