Hitachi airCore 700 - Page 31

27
INSTALLATION & MAINTENANCE MANUAL
Step6. The conrmation screen is displayed.
Select "Yes" and press "OK" to conrm the settings
and Step2 is displayed.
7.1.2.4 Nominate Spill Zone(s)
Step1. Select "Nominate Spill Zone(s)" and press "OK".
Step2. Press "
" or " " to select spill zone.
Press "
" or " " to select zone.
Step3. Press "OK" to save the setting and return to
Zone Installation Menu. Or press "
" to return
to Zone Installation Menu without saving the setting.
NOTES:
•
If common zone is not available, at least one spill zone should be nominated.
•
Spill Zone1-3 should be set to dierent zones.
Zone Labeling
Bedroom 2
Register these contents ?
NoYes
Bac'
OK
Select
Zone Installation Menu
Sensor Assignment
Zone Labeling
Nominate Spill Zone(s)
Common Zone Setup
BackOK Select
Zone ActiIation
(Mon) 16:30
Item Status
Si Zone 1
Zone 1
Si Zone 
N/A
Si Zone N/A
BackOK Confirm
Nominate Si Zone Es9