--- 1 ---
1. PRODUCT NAME
Hitachi Compound Saw, Model C 10FCB
2. MARKETING OBJECTIVE
The Model C 10FCB has been newly developed as a successor of the current Models C 10FC, C 10FC2 and
C 10FCA (REXON's OEM products) intended to be manufactured in the factory of Hitachi Koki Group (HKF) to
keep high quality and to adopt Hitachi Koki's original design. Vigorous sales promotion and market share
increases are anticipated with the introduction of the new Model C 10FCB. Although the Model C 10FCB is of the
same construction as the current models basically, the Model C 10FCB employs additional functions including the
following:
Capable of cutting both 2 x 6 and 4 x 4 materials at the right angle at a time without the use of a plate
Capable of narrowing the clearance between the fences thanks to the adoption of the rotary sub fence
3. APPLICATIONS
Cutting various types of wood workpieces
Cutting workpieces of plywood, decoration panels, soft fiberboard and hard board
Cutting aluminum sashes
4. SELLING POINTS
Equipped with debris guard to
restrict dispersion of chips for
enhanced safety in operation
Press cutting
Left
Right
Miter cutting
Convenient miter with
angle setting mechanism
Capable of cutting both 2 x 6 and 4 x 4
materials at the right angle at a time
without the use of a plate
Newly adopted rotary sub fence
(capable of narrowing the
clearance between the fences)
Lightweight design: 14 kg
Compound miter and
left bevel cutting
Left bevel cutting
Safety (lock-off) switch
(only for USA, Canada)
To Next Page
Loading...
Need help?
General
