--- 4 ---
Standard accessories
Optional accessories
5. SPECIFICATIONS
59 mm (2-5/16") x 144 mm (5-21/32")
89 mm (3-1/2") x 101 mm (3-31/32")
Maximum
cutting
dimentions
Height x
Width
(H x W)
0˚ (Right angle)
Miter cutting ranges Right 0˚ --- 60˚, Left 0˚ --- 45˚
Miter right/left 45˚
59 mm (2-5/16") x 102 mm (4")
[
Right 60˚: 59 mm (2-5/16") x 72 mm (2-13/16")
]
Bevel left 45˚
41 mm (1-5/8") x 144 mm (5-21/32")
Miter right/left 45˚
+
Bevel left 45˚
41 mm (1-5/8") x 102 mm (4")
Bevel cutting ranges Left 0˚ --- 45˚
Compound (miter + bevel)
cutting ranges
Miter: right and left 0˚ --- 45˚, Bevel: left 0˚ --- 45˚
255 mm (10") TCT saw blade (24 teeth, Code No. 318963)
•••••••••••••••
for wood cutting (except for CHN)
255 mm (10") TCT saw blade (100 teeth, Code No. 318964)
•••••••••••••••
for aluminum cutting (for CHN)
255 mm (10") TCT saw blade (30 teeth, Code No. 319107)
•••••••••••••••
for wood cutting (for AUT, GBR, FRA, HOL,
BEL,ESP, SUI, ITA, NOR,
SWE, DEN, FIN)
Dust bag
Vise ass'y
Box wrench 10 mm
Holder
Stopper
Full-load current
Type of motor
Max. output
No-load rotation speed
Cord
Packaging
Coating
Weight
Main body dimensions
(Width x Depth x Height)
2,300 W
AC single phase commutator series motor
110 V --- 115 V: 15 A 220 V: 7.8 A 230 V: 7.5 A 240 V: 7.2 A
Type: 2-conductor cabtire cable
Length: 2.2 m (7.2 ft)
Corrugated cardboard box
14 kg (31 Ibs.), gross weight 21 kg (46.5 Ibs.)
547 mm x 592 mm x 581 mm (21-17/32" x 23-5/16" x 22-7/8")
4,900/min.
Metallic silver green
Angle stopper positions
Right and left 0˚, 15˚, 22.5˚, 31.6˚, 35.3˚, 45˚, Right 60˚ (for USA, CAN)
Right and left 0˚, 15˚, 22.5˚, 30˚, 45˚, Right 60˚
Applicable saw blade
255 mm (10") external dia.
Power source type and voltage AC single phase 50/60 Hz, 110V, 115 V, 220V --- 240V
Saw blade bore
USA/CAN
Asia/China
Europe
Australia
New Zealand
25.4 mm (1") and
30 mm (1-11/64")
30 mm (1-11/64")
25.4 mm (1")15.9 mm (5/8")
Safety (lock-off) switch
USA/CAN Europe/China
Asia/Australia, etc.
Not providedNot providedProvided
Not provided Not providedProvidedSaw cover lock
255 mm (10") TCT saw blade (60 teeth, Code No. 976472)
•••••••••••••••
for normal cutting
255 mm (10") TCT saw blade (100 teeth, Code No. 319658)
•••••••••••••••
for aluminum cutting (except for CHN)
To Next Page
Loading...
Need help?
General
