Hitachi C 10RA User Manual

--- 5 ---
6. COMPARISONS WITH SIMILAR PRODUCTS
Saw blade
Maximum
cutting
Outer diameter
Inner diameter
0 (right angle)
45 (bevel)
Maximum dado cutter size
(diameter x width)
Maximum ripping capacity
Table dimensions
(width x depth)
Table dimensions with
extensions (width x depth)
Voltage, Current
Motor
Rated input
Max. output (HP)
No-load speed
Brake
Dust collection port
Machine dimensions
(width x depth x height)
Net weight
Standard accessories
Optional accessories
Item
Maker
Model
HITACHI
C 10RA
C
255 mm (10")
15.8 mm (5/8"), 25.4 mm (1"),
30 mm (1-3/16")
76 mm *
1
(3")
11 mm --- 63 mm *
1
(7/16" --- 2-1/2")
152 mm x 12 mm (6" x 1/2")
Right side 360 mm (14-5/32")
Left side 400 mm (15-3/4")
494 mm x 500 mm
(19-7/16" x 19-11/16")
864 mm x 500 mm
(34" x 19-11/16")
V 110 115 230 240
A 13 15 6.5 6.3
V 110 115 230 240
W 1360 1640 1430 1430
1,940 W (2.6 HP)
5,000 /min
Provided (115 V only)
O.D. 65 mm x I.D. 59 mm
(O.D. 9/16" x I.D. 5/16")
494 mm x 500 mm x 310 mm
(19-7/16" x 19-11/16" x 12-3/16")
25.4 kg (56 lbs) (with extension wing)
(for USA, AUS and NZL)
25 kg (55 lbs) (with extension wing)
(for Europe)
255 mm (10") TCT
saw blade (NT 36)
•••••••••••••••••••••
1
Extension wing
•••••••••••••••••••••••••••••••
2
Set plate
••••••••••••••••••••••••••••••••••••••••
4
Wrench (22 mm)
•••••••••••••••••••••••••••••
1
Wrench (23 mm x 26 mm)
•••••••••••••••
1
Elbow (chip extraction duct)
•••••••••••••
1
Hex. wrench (for Europe only)
•••••••••
1
Table saw stand (Code No. 314819)
(standard accessory for other
specifications)
Push stick (Code No. 314324)
(standard accessory for Europe)
Dado insert (Code No. 314325)
210 mm (8-1/4")
15.8 mm (5/8")
64 mm (2-1/2")
11 mm --- 41 mm (7/16" --- 1-5/8")
152 mm x 12 mm (6" x 1/2")
Right side 300 mm (11-13/16")
Left side 300 mm (11-13/16")
660 mm x 460 mm
(26" x 18-1/8")
1,413 mm x 460 mm
(55-5/8" x 18-1/8")
115 V, 12 A
1,350 W
1,500 W (2.0 HP)
4,500 /min
None
660 mm x 460 mm x 375 mm
(26" x 18-1/8" x 14-3/4")
17 kg (37.5 lbs)
210 mm (8-1/4") TCT
saw blade (NT 18)
•••••••••••••••••••••
1
Rip fence
•••••••••••••••••••••••••••••••••••••••
1
Miter gauge
••••••••••••••••••••••••••••••••••••
1
Wrench (22 mm)
•••••••••••••••••••••••••••••
1
Wrench (19 mm)
•••••••••••••••••••••••••••••
1
Wrench (10 mm x 13 mm)
•••••••••••••••
1
Hex. Bar wrench
•••••••••••••••••••••••••••••
1
Table saw stand
Holder set
Sub-table set
Chisel tooth combination
Saw blade (NT 30)
TCT saw blade (NT 18, 40)
Dado head set
Dado outer flange
Table insert (for dado head)
*
1
Specifications for other than U.S.A. models
*
2
Specifications are subject to change by area.
*
2
------

Hitachi C 10RA Specifications

General

Brand	Hitachi
Model	C 10RA
Category	Saw
Language	English