To Next PageTo Next Page
Need help?Do you have a question about the Hitachi C12LSH and is the answer not in the manual?
Essential safety precautions for operating electric power tools.
Specific safety measures for using the slide compound miter saw.
Attaching the power tool to a level, horizontal work bench.
Creating a groove on the lower guard for proper operation.
Adjusting the table insert for precise cutting alignment.
Verifying the saw blade's lowest cutting position.
Setting saw blade lower limit for large workpieces.
Ensuring correct usage of sub fences for safe cutting.
Setting up the tool for oblique angle cuts.
Ensuring the workpiece is securely clamped before cutting.
Installing optional holders and stoppers for precision cutting.
Utilizing the ink line for precise cutting alignment.
Calibrating the laser line for accurate cutting guidance.
How to turn the tool on and off using the trigger switch.
Mounting and using the standard vise assembly for workpieces.
Detailed steps for performing general cutting operations.
Technique for cutting narrow workpieces using press cutting.
Mounting auxiliary board for cutting large workpieces.
Technique for cutting wide workpieces using slide cutting.
Step-by-step guide for performing bevel cuts on the material.
Making precise adjustments to the bevel angle setting.
Step-by-step guide for performing miter cuts.
Making precise adjustments to the miter angle setting.
Procedures for performing combined miter and bevel cuts.
Specific techniques for cutting crown molding profiles.
Tips for cutting deformable materials like aluminum sash.
Proper usage and maintenance of the standard dust bag accessory.
Step-by-step instructions for installing the saw blade.
Step-by-step instructions for removing the saw blade.
Checks for saw blade, carbon brushes, motor, screws, and lower guard.
Procedures for storage, guard/belt replacement, lubrication, and cleaning.
Instructions for replacing the power supply cord.
General