Installing the Driver and Utility 5-9
4. Select "C:\WINDOWS\system32\DRIVERS\elxstor.sys" on the "Driver File Details" window and check [File version].
And confirm the agreement with the table below.
<< CB320 >>
Fibre Channel Adapter FW version
Driver Version
Windows Server 2008 (32bit)
Windows Server 2008 (64bit) /
Windows Server 2008 R2
Don’t care 5.2.70.018 7.2.70.018
<< CB2000 /X55A1/X55A2/X55R3/X55S3/X57A1/X57A2 >>
Fibre Channel Adapter FW version
Driver Version
Windows Server 2008 (32bit)
Windows Server 2008 (64bit) /
Windows Server 2008 R2
1.1**** or lower 5.2.70.018 7.2.70.018
2.01A12 or higher 2.74.014.001 (*1) 2.74.014.001 (*1)
<< CB2000 /X55R4 >>
Fibre Channel Adapter FW version
Driver Version
Windows Server 2008 (32bit)
Windows Server 2008 (64bit) /
Windows Server 2008 R2
Don’t care 2.74.014.001 2.74.014.001
(*1) Need to use the firmware version “2.01a12” or higher for Emulex Fibre Channel Adapter when using this driver.
5. Click [OK] and, on the screen of step 3, click [OK] to close the screen.
To Next Page
Loading...
