Hitachi CP-RX60 - Page 28

28
Multifunctional settings
Item
Description
COLOR TEMP
Using the buttons ▲/▼ switches
the
mode of color temperature
.
HIGH

MIDDLE
CUSTOM

LOW
To adjust CUSTOM
Selecting
the
CUSTOM and then pressing the
button ► or the ENTER butto
n
dis
plays
a
dialog
to aid you in adjusting the OFFSET and/or GAIN
of CUSTOM mode.
OFFSET adjustments change the color intensity
on the whole tones of the test pattern.
GAIN adjustments mainly affect color intensity
on the brighter tones of the test pattern.
Choose an item using the buttons ◄/►, and adjust the level using
the buttons ▲/▼.
Using a test pattern
Y
ou can display a test pattern for checking the effect of your
You can display a test pattern for checking the effect of your Y
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the pattern changes as
below.
No pattern

Gray scale of 9 steps
Ramp

Gray scale of 15 steps
COLOR
Using the buttons ▲/▼ adjusts the
strength of whole color.
Strong

Weak
•
This item can be chosen only at a vid
eo signal
.
TINT
Using the buttons ▲/▼ adjusts the
tint.
Green

Red
•
This item can be chosen only at a vid
eo signal
.
SHARPNESS
Using the buttons ▲/▼ adjusts th
e
sharpness
.
Strong

Weak
PICTURE menu (continued)
R
+0
G
+0
B
+0
COLOR TEMP
ENTER :
OFFSET
R
+0
G
+0
B
+0
GAIN
Ramp
:SELECT
HIGH
MIDDLE
LOW
CUSTOM
COLOR TEMP
[
RGB
]
R
+0
G
+0
B
+0
OFFSET
R
+0
G
+0
B
+0
GAIN