Hitachi CP-RX60 - OPTION menu

38
Multifunctional settings
OPTION menu
Item
Description
AUTO SEARCH
Using the buttons ▲/▼
turns on/off the automatic signal search
function
.
TURN ON

TURN OFF
When the TURN ON is selected, detecting no signal automatically
cycles through input ports
i
n order of followin
g
.
Then
when an input
is found, the proje
ctor will stop searching and display the image
.
RGB

S-VIDEO

VIDEO
AUTO OFF
Using the buttons ▲/▼ adjusts the
time to count down to
automatically turn the projector off
.
Long (max. 99 minutes)

Short (min. 0 minute = DISABLE)
AUT
O OF
F
ENABL
E
10
AUT
O OF
F
DISABLE
0
When the time is set to 0, the projector is not turned off
automatically.
When the time is set to 1 to 99, and when the passed time with
a no-signal or an unsuitable signal reaches at the set time, the
projector lamp will go off and the power indicator begins blinking.
Please refer to the section
“Turning off the power”
(

1
7
)
.
With the OPTION menu, items shown in the table below can
be performed.
Choose an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress
, except for the items LAMP
TIME and FILTER TIME.
Then perform it referring to the
following table.
MENU
[
RGB
]
:SELECT
AUTO SEARCH
AUT
O OFF
LAMP TIME
FILTER TIME
SERVICE
TURN OFF
0
0
0
PICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MEN
U