Hitachi CP-RX60 - SCREEN menu

35
Multifunctional settings
SCREEN menu
Item
Description
LANGUAGE
Using the buttons ▲/▼ switches the
OSD (On Screen Display)
language
.
SUOMI

POLSKI

TÜRKÇE
ENGLISH

FRANÇAIS

DEUTSCH

ESP
AÑOL
ESPAÑOL ESP

I
TA
LIAN
O
NORSK

NEDERLANDS

POR
TUGUÊS




SVENSKA

TÜRKÇE
MENU POSITION
Using the buttons ◄/►/▲/▼ adjusts the
menu position
.
To quit the operation, press the MENU button or keep no operation
for 10 seconds.
OSD BRIGHT
Using the buttons ▲/▼ switches the
brightness level of the OSD (On
Screen Display)
.
Bright

Dark
BLANK
Using the buttons ▲/▼ switches the
mode for the blank scree
n
.
The blank screen is the screen
for the temporarily blanking feature
(


2
1
)
.
It is displayed by pressing the BLANK button.
MyScreen

ORIGINAL

BLUE

WHITE

BLACK
MyScreen is the screen you can register a desired screen.
ORIGINAL screen is the existing standard screen.
BLUE, WHITE
and BLACK are non-patterned (plain) screens in each color.
•
To avoid remaining as an afterimage, the MyScreen and the
ORIGINAL screens will change to the BLACK screen after several
minutes.
•
For the MyScreen, please refer to the item MyScreen
(

3
6
).
With the SCREEN menu, items shown in the table below can
be performed.
Choose an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
MENU
[
RGB
]
:SELECT
LANGUAGE
MENU POSITION
OSD BRIGHT
BLANK
START UP
MyScreen
MyScreen Lock
MESSAGE
ENGLISH
5
BLACK
ORIGINA
L
TURN OFF
TURN ON
PICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MEN
U