Hitachi CP-RX60 - Auto Adjust Execute

31
Multifunctional settings
Item
Description
H SIZE
Using the buttons ▲/▼ adjusts the horizontal size.
Large

Small
•
This item can be chosen only at a RGB signal.
• When this adjustment is excessive, the picture may not be
displayed correctly. In such a case, please reset the adjustment
pressing the RESET button during this operation.
AUTO ADJUST
EXECUTE
Choos
ing this item performs the automatic adjustment feature.
At a RGB signal
The vertical position, the horizontal position, the clock phase and
horizontal size will be automatically adjusted.And the aspect ratio
(ASPECT) will be automatically selected.
Make sure that the application window is set to its maximum size
prior to attempting to use this feature. A dark picture may still be
incorrectly adjusted. Use a bright picture when adjusting.
At a video signal or s-video signal
The signal type mode best suited for the respective input signal
and the aspect ratio (ASPECT) will be selected automatically.
And the vertical position (V POSITION), the horizontal position (H
POSITION) will be automatically adjusted.
At a component video signal
The vertical position (V POSITION), the horizontal position (H
POSITION) and the clock phase (H POSITION) will be automatically
adjusted. And the aspect ratio (ASPECT) will be automatically
selected.
•
This function is available only when the AUTO mode is selected to
the item VIDEO FORMAT of INPUT menu. For a component video
signal, the signal type is identifi ed automatically independently of
this function.
•
The automatic adjustment operation requires approximately 10
seconds. Also please note that it may not function correctly with
some input.
•
This operation may not work well at some signals. If the picture
becomes unstable (ex. a irregular picture, a color lack), please
select the suitable mode to the item “VIDEO” of the INPUT menu.
IMAGE menu (continued)