Using the buttons ▲/▼ switches the
• This function performs only at an interlaced signal of a VIDEO
input, a S-VIDEO input or a component video input of 525i (480i) or
When the TV or FILM is selected, the screen image will be crisper.
The FILM mode is adaptable to the 2-3 Pull-Down system to the
(not adaptable to the 2-2 Pull-Down system)
may cause a certain defect (for example, jagged line) of the picture
at a quick moving object. In such a case, please select the TURN
OFF, even though the screen image may lose the crisp.
Choosing a mode of MY MEMORY using the buttons ▲/▼ and then
pressing the button ► or the ENTER button performs each function.
This projector has 4 numbered memories for adjustment data.
Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on
the memory whose number corresponds with the command’s number,
and adjusts the picture automatically depending on the data.
Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current
adjustment data on the memory whose number corresponds with
To Next Page
Loading...
