Hitachi CP-RX60 - Page 40

40
Multifunctional settings
Item
Description
SERVICE
Choosing this item displays the SERVICE menu.
Choose an item using the buttons ▲/▼, and press the button ► or
the ENTER button to progress.
FAN SPEED

AUTO ADJUST
FACTORY RES
ET

GHOST
FAN SPEED:
Using the buttons ▲/▼ switches the
r
otation speed of the cooling
fans. The HIGH is the mode for use at highlands etc.
Note that the
projector is noisier when the HIGH is selected.
HIGH

NORMAL
AUTO ADJUST:
Using the buttons ▲/▼ enables or disables the automatic
adjustment.
Depending on conditions, such as input image, signal cable to the
unit, environment around the unit, etc., the automatic adjustment
may not work correctly. In such a case, please choose DISABLE to
disable the automatic adjustment, and adjust manually.
ENABLE

DISABLE
GHOST
:
1.
Choose a color element of ghost using the
buttons ◄/►.
2.
Adjust the chosen element using the buttons
2. Adjust the chosen element using the buttons 2.
▲/▼ to disappear ghost.
FACTORY RESET:
T
o perform reset, point at RESET using the button ▲
To perform reset, point at RESET using the button ▲T
.
By this
functio
n
, all the items in all of menu will collectively return
to the
initial setting
.
N
ote
that the items LAMP TIME, FILTER TIME
and LANGUAGE are not reset.
RESET

CANCEL
OPTION menu (continued)
:SELECT
AUTO ADJUST
GHOST
FACTORY RESET
SERVICE
FANSPEED NORMAL
FANSPEED
HIGH
NORMAL
AUTO ADJUST
ENABLE
DISABLE
FACTORY RESET
RESET
CANCE
L
+0 +0
GHOST
+0
R G
B