Hitachi CP-WU5500 User Manual

11
Setting up
Arrangement (continued)
►Place the projector in a cool place with sufcient
ventilation. The projector may shutdown automatically or may malfunction if its
internal temperature is too high.
Using a damaged projector could result in a re and an electric shock.
• Do not place the projector in direct sunlight or near hot objects such as heaters.
• Do not place the projector where the air from an air conditioner or similar unit
will blow on it directly.
• Do not place the projector on carpet, cushions or bedding.
• Do not stop up, block nor cover the projector's vent holes. Do not place
anything around the projector that could be sucked in or stuck to the projector's
intake vents.
• Do not place the projector at places that are exposed to magnetic elds, doing
so can cause the cooling fans inside the projector to malfunction.
►Avoid placing the projector in smoky, humid or dusty place. Placing the
projector in such places could cause a re, an electric shock and malfunction of
the projector.
• Do not place the projector near humidiers. Especially for an ultrasonic
humidier, chlorine and minerals contained in tap water are atomized and could
be deposited in the projector causing image degradation or other problems.
• Do not place the projector in a smoking area, kitchen, passageway or by the
window.
• Position the projector to prevent light from directly hitting the
projector's remote sensor.
• Do not place the product in a place where radio interference may be caused.
• Set the ALTITUDE of the SERVICE item in the OPTION menu correctly. If the
projector is used at an altitude of about 1600 m or higher, set ALTITUDE of
the SERVICE item in the OPTION menu to HIGH (
88). Otherwise, set it to
NORMAL.
• Keep heat-sensitive things away from the projector. Otherwise, they may be
damaged by the heat from the projector.
CAUTION
NOTICE
• When the temperature inside the projector rises high, it may cause the
high rotation of the fan for cooling temporarily.
NOTE

Hitachi CP-WU5500 Specifications

General

Matrix size	0.67 \
Native aspect ratio	16:10
Projection distance	- m
Projection technology	3LCD
Contrast ratio (typical)	10000:1
Screen size compatibility	30 - 300 \
Projection distance (tele)	1.5 - 15.2 m
Projection distance (wide)	0.8 - 8.9 m
Projector native resolution	WUXGA (1920x1200)
Keystone correction, horizontal	-30 - 30 °
Projector brightness (economic mode)	3640 ANSI lumens
Focus	Manual
Zoom capability	Yes
Focal length range	- mm
Vertical lens shift range	0 - 50 %
Horizontal lens shift range	-4.4 - 4.4 %
Lamp power	300 W
Light source type	Lamp
Service life of light source	4000 h
Service life of light source (economic mode)	6000 h
RMS rated power	16 W
Number of built-in speakers	1
Wi-Fi	-
Power source	AC
AC input frequency	50 - 60 Hz
Power consumption (max)	440 W
Power consumption (standby)	- W
DVI port	No
HDMI connector type	Full-size
HDMI ports quantity	3
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	0
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Cable lock slot type	Kensington
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL L, PAL M, SECAM
Noise level	38 dB
Certification	EMC, Low Voltage, ErP, RoHS, CE
Noise level (economic mode)	29 dB
Operating temperature (T-T)	0 - 40 °C
Sustainability certificates	RoHS

Weight and Dimensions

Depth	334 mm
Width	460 mm
Height	138 mm
Weight	7200 g