21
• To use a wired remote control, connect a wired remote control to
the REMOTE CONTROL IN port. You can also connect another projector to
the REMOTE CONTROL OUT port to control it from the wired remote control.
You can utilize this projector as a remote control-relay with the REMOTE
CONTROL IN and OUT ports. To connect the wired remote control or another
projector to the REMOTE CONTROL IN or OUT ports, use audio cables with
3.5 mm diameter stereo mini plugs. This function is useful when a wireless
remote signal may not reliably reach the projector.
NOTE
Setting up
Connecting with your devices (continued)
To Next Page
Loading...
