67
INPUT menu
Item Description
PbyP / PinP
SETUP
PinP POSITION
Using ▲/▼ buttons on the remote control changes the position of
sub area in PinP mode (
50
).
PbyP / PinP FRAME LOCK
Select the screen that enables FRAME LOCK function when using
PbyP or PinP.
LEFT / PRIMARY: Enables FRAME LOCK function for input on left
screen of PbyP or on primary area of PinP.
RIGHT / SECONDARY: Enables FRAME LOCK function for input on
right screen of PbyP or on secondary area of PinP.
MHL STANDBY
PWR.
Using the ▲/▼ buttons switches the MHL STANDBY PWR. ON/
OFF.
ON
ó
OFF
• When the STANDBY MODE is set to SAVING, the MHL STANDBY
PWR. menu cannot be operated and MHL power feeding is
unavailable with standby mode (
72
).
• When the MHL STANDBY PWR. is set to ON, there may be some
noise with standby mode. This is not malfunction.
To Next Page
Loading...
