93
OPTION menu
Item Description
SERVICE
(continued)
CONTROL
TERMINAL *
WIRED NETWORK
Selects whether to use LAN or HDBaseT port.
LAN
ó
HDBaseT
RS-232C
Selects whether to use CONTROL or HDBaseT
port.
CONTROL
ó
HDBaseT
HDMI OUT
RESOLUTION
Selects the device to refer to the resolution
information of HDMI output.
EXTERNAL DEVICE
⇔
PROJECTOR
・
When EXTERNAL DEVICE is selected, the
resolution of the signal input to the projector and
signal output from the projector may be restricted
by the maximum resolution of the connected
device such as projector or monitor.
・
When PROJECTOR is selected, the image from
the device connected to HDMI OUT may not be
displayed normally.
* CP-WU5505/CP-WX5505/CP-X5555 only
(continued on next page)
• Only either LAN or HDBaseT port
can be used for the connection to the network.
Switch it according to the environment.
NOTE
• Only either CONTROL or HDBaseT
port can be used for the RS-232C connection.
Switch it according to the environment.
NOTE
To Next Page
Loading...
