12
1. Connection to the network
1.4.2 Wireless LAN connection set up
Using wireless LAN utility for Windows
®
7 standard.
Wireless LAN initial settings for the projector is as follows.
1.4 Manual network connection setting - Wireless LAN - (continued)
Mode : Ad-Hoc
DHCP : Off
IP address : 192.168.10.254
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
SSID : wireless
Encryption : Off
Channel : 1
* You can change these settings via a web browser on your computer or from the
menu of the projector. Refer to the item 3.1.3 Network Settings (
21) or
NETWORK menu in the Operating Guide.
1) Select "Change adapter settings" from the
menu on the left side of the "Network and
Sharing Center" window.
2) Right-click "Wireless Network Connection" to open the
menu, and select "Properties".
(continued on next page)
3) Select "Internet Protocol Version 4 (TCP/IPv4)" and click
[Properties].
To Next Page
Loading...
Need help?
General