25
CP-WX11000 ( P6WX )
3. Maintenance
(1) Clean the LCD panel surface with Swab. (2) Insert Swab between LCD panel and PRISM
when you clean the back surface of LCD panel
and Optical fi lter. (Refer next section.)
Swab
Swab
4. Cleaning the panels and optical filters
Using swab and air duster, remove the dust.
Swab
Panel
Holder
Optical filter
Air
5. Re-assembly
Re-assemble the set in the reverse order of the disassembly.
• While removing the dust, separated dust
will be blown off by air cooling system.
• Please pay attention not to damage
panels and optical filters.
To Next Page
Loading...
